![background image](http://html2.mh-extra.com/html/xerox/phaser-3610/phaser-3610_user-manual_4111385056.webp)
Paper and Media
56
Xerox
®
Phaser
®
3610 Black and White Printer
User Guide
11.
Verify or set the paper size and type.
a.
At the printer control panel, press the
Menu
button.
Note:
To navigate through the menu, use the
Up
or
Down
arrow buttons.
b.
Navigate to
Tray Settings
, then press
OK
.
c.
Navigate to the desired paper tray, then press
OK
.
d.
Navigate to
Tray Mode
, then press
OK
.
e.
Navigate to
Panel Specified
, then press
OK
.
f.
To return to the previous menu, press the
Left
arrow button.
g.
Navigate to
Paper Size
, then press
OK
.
h.
To select a setting, press the
Up
or
Down
arrow buttons, then press
OK
.
i.
To return to the previous menu, press the
Left
arrow button.
j.
Navigate to
Paper Type
, then press
OK
.
k.
To select a setting, press the
Up
or
Down
arrow buttons, then press
OK
.
For instructions on setting tray prompts, see
Configuring Tray Behavior
on page 60.
Configuring Trays 1–4 for the Paper Length
You can adjust the lengths of trays 1–4 to accommodate A4/Letter and Legal paper sizes. In the Legal
length settings, the trays protrude from the front of the printer.
To change the 550-Sheet Feeders in trays 1–4 to match the paper length:
1.
Remove all paper from the tray.
2.
To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,
then pull it out.