![background image](http://html2.mh-extra.com/html/xerox/phaser-3610/phaser-3610_user-manual_4111385094.webp)
Maintenance
94
Xerox
®
Phaser
®
3610 Black and White Printer
User Guide
Cleaning the Transfer Unit
The Clean Transfer Unit feature allows you to start motors that clean the bias transfer roller. You can use
this feature if you observe toner on the back side of printed pages.
To clean the transfer unit:
1.
At the printer control panel, press the
Menu
button.
Note:
To navigate through the menu, use the
Up
or
Down
arrow buttons.
2.
Navigate to
Admin Settings
, then press
OK
.
3.
Navigate to
Service Tools
, then press
OK
.
4.
Navigate to
Clean Trans Unit
, then press
OK
.
5.
At the
Are you sure?
prompt, press
Yes
, then press
OK
.
After the process completes, the printer to returns to Ready.
Resetting Defaults
The Reset Defaults feature restores the system settings to the factory default settings.
CAUTION:
Resetting NVM to the default erases all fax numbers, email addresses, and server
addresses from the Address book.
To reset defaults:
1.
At the printer control panel, press the
Menu
button.
Note:
To navigate through the menu, use the
Up
or
Down
arrow buttons.
2.
Navigate to
Admin Settings
, then press
OK
.
3.
Navigate to
Service Tools
, then press
OK
.
4.
Navigate to
Reset Defaults
, then press
OK
.
5.
At the
Are you sure?
prompt, press
Yes
, then press
OK
.
After the process completes, the printer to returns to Ready.