Xerox Legacy 4112, Руководство системного администратора

Страница: 84 / 364

Xerox 4112/4127 Copier/Printer System Administration Guide 4-4
4. E-mail
h. Select
Port Status
and select
Change Settings
.
i. Select
Enabled
and then select
Save
.
j. Select
Close
repeatedly until the
Connectivity & Network
Setup
screen is displayed
3. If necessary, set the IP Address (Chapter 1 Setting the IP
address. on page 1-17).
4. Exit the System Administrator Mode (Chapter 1 Exiting the
System Administrator Mode on page 1-16).
5.
After the machine is restarted, print out the
Printer Settings
List
to confirm that the ports are enabled and TCP/IP is
configured.
Configuring the E-mail environment
This section describes the configuration procedure to use the e-
mail feature.
NOTE 1: The configuration can also be performed using
CentreWare Internet Services.
NOTE 2: Enable the SOAP port and the SNMP port in most cases.
Refer to
“Using CentreWare Internet Services” on page 3-1
.
1.
Enter the System Administrator Mode (Chapter 1 Entering the
System Administrator Mode on page 1-15
.
)
2.
Set the e-mail address, host name, and domain name.
a. Select
System Settings
.
b. Select
Connectivity & Network Setup
.
c. Select
Machine E-mail Address/Host Name
.
d. Select
E-mail Address
and then select
Change Settings
.
e. Enter the
E-mail Address
using the keyboard displayed.
f. Select
Save
.
g. Set the
Host Name
and
Domain Name
as above.
h. Select
Close
.
If SMTP has been selected
for the E-mail Receiving
Protocol
• Alias cannot be configured. User can decide the account
(the left side of @ mark). The address (the right side of @
mark) is a combination of host name and domain name.
• Example: mymail@mycompany.com
– Account name: mymail
– Host name: host
– Domain name: mycompany.com