60 ¦ Telephone Lines and Additional Devices · Detecting Call Signal Clock Pulse Automatically
EN
Start Automatic Recognition
1.
Press
MENU
.
RECEPT. SET-UP
appears on the display.
2.
Select using
[
INSTALLATION
.
3.
Confirm with
o
.
STATION NAME
appears on the display.
4.
Select using
[
DISTINCT. RING
.
5.
Confirm with
o
.
SET OPTION
appears on the display.
6.
Select using
[
SET PATTERN
.
7.
Confirm with
o
.
AUTODETECT RING
appears on the display.
8.
Call the device with the desired telephone number (the desired call signal clock pulse),
until
RING DETECTED
appears on the display of the device.
9.
End the call on the caller's device.
10. Press
j
on the device.
The call signal clock pulse was stored.
Switch on the Call Signal Clock Pulse
After automatic recognition of the call signal clock pulse, you must switch on this call signal
clock pulse on your device.
1.
Press
MENU
.
RECEPT. SET-UP
appears on the display.
2.
Select using
[
INSTALLATION
.
3.
Confirm with
o
.
STATION NAME
appears on the display.
4.
Select using
[
DISTINCT. RING
.
5.
Confirm with
o
.
SET OPTION
appears on the display.
6.
Confirm with
o
.
7.
Select using
[
YES
.
8.
Confirm with
o
.
9.
You can exit with
j
.
CAUTION!
Switching of External Answering Machine
If you are using an external answering machine, switch this off or disconnect it from
the power supply. If the external answering machine is switched on, the recognition
of the call signal clock pulse can be disrupted.
Notice
Call Signal Clock Pulse Not Detected
If the call signal clock pulse is not detected by the device,
RING NOT DETECT.
appears on the display. Press
j
and repeat the process.
office-fax-if-6020-6025-manual-uk-253200935-a.book Seite 60 Mittwoch, 22. April 2009 5:58 17