Telephone Lines and Additional Devices · Connecting Additional Devices¦ 57
EN
Switch on the Flash Function for the Extension
For older telephone systems, the outside line access code can be R (= FLASH). Only in this set-
ting can a connection to the public telephone network be made. With the flash function
switched on, a flash signal is triggered with the
R
key.
1.
Press
MENU
.
RECEPT. SET-UP
appears on the display.
2.
Select using
[
INSTALLATION
.
3.
Confirm with
o
.
STATION NAME
appears on the display.
4.
Select using
[
TEL.LINE SETUP
.
5.
Confirm with
o
.
LINE TYPE
appears on the display.
6.
Select using
[
PBX FLASH
.
7.
Confirm with
o
.
8.
Using
[
select whether by pressing the
R
key, a flash signal should be triggered or not.
9.
Confirm with
o
.
Connecting Additional Devices
Additional Devices
You can operate additional devices on a telephone line, such as cordless telephones, answer-
ing machines, modems or charge counters.
Connection to the Device
You can connect additional devices directly to your device.
1.
Insert the telephone cable of the additional device into the
EXT
socket (RJ-11-connec-
tion) at the bottom of the device.
Notice
Outside Line Access Code is Automatically Dialled
Store telephone numbers in the telephone book at the beginning using
R
to auto-
matically establish a connection to the public telephone network. By pressing the
R
key, E appears on the display.
office-fax-if-6020-6025-manual-uk-253200935-a.book Seite 57 Mittwoch, 22. April 2009 5:58 17