Xerox DocuPrint N2825, Информационное руководство

Страница: 32 / 124

Setting up APPSOCKET
2-18
❖
DocuPrint Technical Information Guide
Setting from
Windows or Unix
Operating Systems
Perform these steps to enable or disable AppSocket using
telnet from a Windows or Unix OS. Some DocuPrint
network printers do not support telnet. For these printers,
change the AppSocket setting from the Control Panel as
described in the previous section.
1 Open a telnet session.
Windows: Open a MS-DOS window, type telnet
x.x.x.x[Enter] , where x.x.x.x is the IP address
Unix: Type telnet hostname in a shell
2 Type ![Enter] and then yes[Enter] to enter monitor mode.
3 Select the Network Protocols Menu, N[Enter] .
4
Select the TCP/IP Options Menu, T[Enter] .
5 Select the Socket Options Menu, S[Enter] .
6 Type y[Enter] .
7
Select y [Enter] to enable or n [Enter] to disable
AppSocket (TCP Sockets)
8
Type [Enter] .
9 Select X [Enter] to exit this menu or end the telnet
session.
Telnet only works if the device is on the same subnet as the
host (i.e. computer or workstation).