Xerox DocuPrint N2825 Скачать руководство пользователя страница 99

Страница: 99 / 124

Compatibility

Chapter 7: OS/2 Network Setup

❖

7-3

Compatibility

The DocuPrint printer has been tested in the following
environments.

Network Operating

Systems

• Warp Server V 4.0 (with TCP/IP installed)

• Lan Server V 4.0 with TCP/IP for OS/2 V 2.1

• OS/2 Warp V 4.0 (Peer to Peer) (with TCP/IP installed)

• OS/2 Warp Connect V 3.0 (Peer to Peer) (with TCP/IP

installed)

Required OS/2

FIXPACKS

•

Warp Server

APAR 11017 - or -

MPTS Fixpack WR08415 (converged) and “LATEST”
TCP/IP V 4.0 PRINT Fixpack (including any requisite
fixes/apars) - or -

TCP/IP Fixpack UN00959 and “LATEST” TCP/IP V 3.1
PRINT Fixpack (including any requisite fixes/apars)

• Lan Server V 4.0 with TCP/IP V 2.0

APAR 11017 (PN 70015)

• OS/Warp V 4.0

MPTS Fixpack WR08415 (converged) and “LATEST”
TCP/IP V 4.0 PRINT Fixpack (including any requisite
fixes/apars)

• OS/2 Warp Connect V 3.0

MPTS Fixpack WR08415 (converged) and “LATEST”
TCP/IP V 4.0 PRINT Fixpack (including any requisite
fixes/apars) - or -

TCP/IP Fixpack UN00067 and “LATEST” TCP/IP V 3.0
PRINT Fixpack (including any requisite fixes/apars)

OTHER VERSIONS:

Other versions of Lan Server with

TCP/IP for OS/2 may work, but have not been tested and
are not supported.

Содержание DocuPrint N2825





























































































































Результаты поиска

Содержание DocuPrint N2825

Отзывы:

Похожие инструкции для DocuPrint N2825

Бренды по названию

Популярные бренды

Xerox DocuPrint N2825, Информационное руководство

Результаты поиска

Содержание DocuPrint N2825

Отзывы:

Похожие инструкции для DocuPrint N2825

Бренды по названию

Популярные бренды