Xerox DocuPrint 92C NPS, Руководство по обслуживанию

Страница: 31 / 62

XEROX DOCUPRINT 92C NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE 5-1
5. 5 Inks
Dry ink is the black or colored powder that forms the image on the
printed page. This chapter describes the procedure for adding dry ink
to the printer. This chapter also describes the procedure to change
the Customer Changeable Unit (CCU) that allows additional colors to
be used.
Adding dry ink
You do not need to monitor the amount of dry ink remaining in the
bottle at any given time; the system monitors it for you.
As the dry ink level gets low, the system performs more frequent print
quality adjustments. Eventually, when the dry ink level is too low, the
system cannot perform print quality adjustments.
When the Attention light is a steady yellow and a message displays
on the printer control console indicating that the printer is low on
either black or color dry ink, add dry ink at your earliest convenience.
If you do not add dry ink, the Attention light turns a modulated yellow,
and the printer eventually stops printing. The printer will not resume
printing until you replace the dry ink bottle. When the message
BLACK DRY INK BOTTLE IS EMPTY
or
COLOR DRY INK BOTTLE
IS EMPTY
appears on the printer control console, the graphic display
indicates the location of the dry ink bottle.
Note: Do not discard damaged, unused dry ink bottles. Return the
bottles to Xerox for exchange (for credit in the USA).
Caution: To prevent dry ink spillage, remove the bottle only when
directed to do so by a message on the printer control console.