Xerox DocuPrint 92C NPS, Руководство по обслуживанию

Страница: 11 / 62

XEROX DOCUPRINT 92C NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE 1-1
1. 1 Feeder trays
This chapter shows the steps needed to load and check feeder trays
on the DocuPrint printer, and explains what actions are necessary if
paper stock is changed.
Checking and loading feeder trays
Check the amount of paper in each feeder tray by examining the
green lights on the door of the tray. Each light represents 25 percent
of a ream, or about 125 sheets of 20 pound or 80 gsm paper.
•
You do not have to interrupt a print job to load paper because
you can refill one tray while the printer is feeding from another
tray.
•
The printer does not feed all the paper out of a tray. A stack of
approximately 1/4 inch / 6 mm remains in the tray.
Loading feeder trays
It is important to load paper properly in the feeder trays to prevent
jams and loss of production time. The following guidelines will help
ensure maximum efficiency of your printer operation.