manualshive.com logo in svg

Xerox Document Binder 120, Руководство оператора

Поделиться
Скачать
Xerox Document Binder 120 Скачать руководство пользователя страница 124

GETTING TO KNOW THE BINDER 120

XEROX DOCUMENT BINDER 120 OPERATOR MANUAL

2-11

Book path through the Binder 120

The arrows in the illustration below show the movement of the copy
sets along the Binder 120 book path.

1.  Manual Input Station

In manual mode, the operator inserts the copy sets into the Manual
Feeder.  The Manual Feeder delivers each copy set to the Manual
Input Station.

2.  Auto Input Station

In automatic mode, the host machine feeds the copy sets into the
Interface Module of the Binder 120.  The Interface Module delivers
each copy set to the Auto Input Station.

3.  Set Drive Station

The Manual Input Station or Auto Input Station delivers the copy set
to the Set Drive Station where the copy set sheets are aligned.

4.  Book Drive Station

If a Cover Tray has been selected, the cover is delivered to the Book
Drive Station where the cover is held open.  The Set Drive Station
feeds the copy set into the open cover in the Book Drive Station.

5.  Binder Module

The Book Drive Station delivers the book to the Binder Module.  Heat
melts the glue in the cover spine to fuse the copy set sheets into the
cover.  Cooling fans then cool the book.  After this process, the book
is delivered to the Vertical Transport.

6.  Vertical Transport

The Vertical Transport elevates the book to the Output Tray of the
Binder 120.

7.  Output Tray

The Output Tray receives the bound books and stacks them until the
operator unloads them.

2

1

3

5

4

6

7

0312009D-SBR

Содержание Document Binder 120











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды