manualshive.com logo in svg

Xerox Document Binder 120, Руководство оператора

Поделиться
Скачать
Xerox Document Binder 120 Скачать руководство пользователя страница 106

PREPARING THE BINDER 120 FOR ON-LINE AND OFF-LINE OPERATION

3-38

XEROX DOCUMENT BINDER 120 OPERATOR MANUAL

b.

Xerox 5680/5892:

For the Xerox 5680/5892, disconnect the two parts of the
Spacer by removing the metal pin from the hole in the plastic
arm and positioning the plastic arm above the metal pin.

9.

For the Xerox 5680/5892, do the following:

•

Squeeze the metal clip located underneath the inside edge
of the host machine Output Tray.

NOTE:

  A green label on the top surface of the Output Tray

denotes the location of the metal clip on the underside.

•

While squeezing the metal clip, move the Output Tray back
to the inner position.

NOTE:

  The Output Tray has two positions - inner and outer.

The inner position is used for normal operation of the host
machine  The outer position is used when the host machine
is connected to the Binder 120.  The distance between each
position is approximately 1/4 inch (6 mm).  You will feel the
Output Tray click into place at each position.

0312103A-SBR

0 312104A-SBR

0312084A-SBR

Содержание Document Binder 120











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды