manualshive.com logo in svg

Xerox Document Binder 120, Руководство оператора

Поделиться
Скачать
Xerox Document Binder 120 Скачать руководство пользователя страница 122

GETTING TO KNOW THE BINDER 120

XEROX DOCUMENT BINDER 120 OPERATOR MANUAL

2-9

Cover Trays

The Binder 120 has two Cover Trays located on the front right side.
Each Cover Tray holds a cassette of specially designed Xerox
covers.  When you select a Cover Tray from the Control Panel, the
Binder 120 uses the covers in the selected Cover Tray to bind the
books.

The Cover Tray Labels indicate how to control access to the Cover
Trays.  The labels also indicate the cover supply levels.  The Cover
Trays will not close if a cassette is not loaded.

Below is an illustration of the components of the Cover Tray Labels.
Descriptions of each of the components follow the illustration.

1.  Unlock Button

Press this button to unlock the Cover Tray.  When a Cover Tray is
not in use or when the Cover Tray currently in use empties, the
Binder 120 will unlock the Cover Tray automatically for you.

2.  In Use indicator (Red)

This indicator lights when the Cover Tray contains covers, the tray is
currently selected, and the tray is locked and ready for operation.

3.  Please Wait indicator (Amber)

This indicator lights after you press the Unlock button and the Cover
Tray is in the process of unlocking.  It also lights after you close the
Cover Tray or select a tray and the tray is in the process of raising to
the feed position.

4.  Ready to Open indicator (Green)

This indicator lights after you press the Unlock button and the
unlock operation completes.  The Cover Tray is then ready to be
opened.  When the cassette in the Cover Tray currently in use
empties, this indicator lights automatically.

5.  Cover Supply indicators

These indicators provide you with the approximate percentage of
covers in the cassette.  The range is one light lit (cassette is nearly
empty) to six lights lit (cassette is full).  Each light represents
approximately 25 covers.

Содержание Document Binder 120











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды