Xerox Document Binder 120, Руководство оператора

Страница: 119 / 138

GETTING TO KNOW THE BINDER 120
2-6 XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
Item
#
US Name XL/XCL
Name/Symbol
Description
8 Manual Start Button Press this button to start the binding process whenever
you use the Manual Feeder. When binding multiple
copy sets, you do not need to press this button for
each set if you feed the sets within 15 seconds of each
other.
NOTE: For the Xerox 5680/5892, this button also
enables you to process the copy set delivered to the
Output Tray of the host machine when a jam occurs in
the Binder 120. To process the set, first clear the jam
in the Binder 120. Then press the Manual Start button.
To complete the rest of the job, follow the directions on
the User Interface screen of the host machine.
9 Stop Button Press this button to stop the operation of the Binder
120. When you do so, the binding process will halt and
the Attention Lamp, if enabled, will light. If the Binder
120 is connected to a host machine, pressing Stop will
also cause the host machine to cycle down when the
next set is ejected.
10 Reset Button Press this button to reset the Binder 120 and resume
the binding operation. When the Binder 120 is
connected to a host machine, you also must press the
Start button on the host machine to resume the
copying process.