Xerox DocuColor 8000, Руководство по установке программного обеспечения

Страница: 22 / 62

18 Spire CXP8000 Color Server 1.0 Software Installation Guide
5.
Close the Computer Management window.
6.
The Image Disks File System is not Formatted message appears.
Click
OK
.
7.
You have completed Disk Striping .
•
If configuration recovery information is available, proceed to Restoring the
Configuration on page 34.
•
If there is no backup and the system configuration must be done manually,
proceed to
Configuring the Spire CXP8000 Color Server for the First Time on
page 25.
Striping Unknown Disks
Perform the following procedures if you:
•
Have replaced an image disk (low-level format all disks)
•
Have low-level formatted one image disk (low-level format all disks)
Initializing the Disks
1.
Position the mouse pointer in the Disk 1 area, right-click, and select
Initialize
Disk
.
2.
In the Initialize Disk dialog box, verify that the three image disk check boxes
are checked.
3.
Click
OK.
Important: When you replace an image disk or a low-level formatted one
disk, you must low-level format all image disks before you perform the
Striping Unknown Disks procedure, see Appendix B, Formatting the External
Device on page 45.