Xerox DocuColor 6060, Руководство по установке

Страница: 119 / 204

Disk Striping 103
8.
Close the Disk Management window.
9.
The Image Disks File System is not Formatted message appears.
Click
OK
.
10.
You have completed to stripe the
Dynamic
disks.
•
If configuration recovery information is available, proceed to The
Configuration Wizard (If Backup Available) on page 114.
•
If there is no backup and the system configuration must be done
manually, proceed to
The Configuration Wizard If Recovery Fails or
is Unavailable on page 119.
•
If the system recognizes a SCSI hard disk that is new or a disk that
has been low-level formatted perform the following procedure
To
stripe Unknown disks: .
To stripe Unknown disks:
1.
Position the cursor in the area where the disk is designated
Unknown
.
Right-click and select
Write Signature
.
Cursor