DocuColor 5252 System Administration Guide
2-51
Tools Mode
2 T
o
o
ls M
ode
2
Output 10 duplex prints and compare the registration mark or
reference point on side one to side two. Discard the first few
prints, as inconsistency tends to be greater with these images. If
there is misregistration, continue with this procedure.
3
Measure the distance between the registration point and the edge
of the paper on both the lead edge (Y) of the paper and the side
edge (X).
Refer to the Measuring Misregistration figure below. The solid line
registration marks indicate the reference point on side one. The
dotted lines indicate the reference point on side two.
Paper Feeding
Direction in the
Misalignment of
reference point on side 1
to side 2 (X)
Misalignment of reference
point on side one to side 2 (Y)
Side Edge
Lead Edge
of paper
of paper
