manualshive.com logo in svg

Xerox DocuColor 5000, Руководство пользователя, Страница: 152 / 164

Поделиться
Скачать
Xerox DocuColor 5000 Скачать руководство пользователя страница 152

DocuColor 5000 User Guide

7-16

7. Maintenance

Adding Fuser Oil

A message appears on the UI advising you when to add Fuser Oil. 

Use the following procedure to replenish the Fuser Oil supply.

1.

Open the Right Front Door of the digital press.

2.

Place a drop cloth on the floor under the Fuser area. Any oil 
spilled on a hard floor will make the floor slippery.

3.

To open the Reservoir Cap, grasp the tab at the back of the 
cap and pull it forward.
Refer to the following figure for the location of the Fuser Oil 

Reservoir Cap.

4.

Remove the cap from the bottle of Fuser Oil and replace it 
with the Filler Spout Cap.
This cap was provided to you when your digital press was 

installed. Contact your Xerox service representative if you 

cannot locate the Filler Spout Cap and need another one.

Содержание DocuColor 5000





































































































































































Отзывы:

Нет отзывов