Xerox DocuColor 5000 Скачать руководство пользователя страница 100

Страница: 100 / 164

DocuColor 5000 User Guide

4-24

4. Accessories

Electrical/environmental requirements

Western Hemisphere:

115 VAC, 15 amp, for 60 Hz. and 220

VAC, 10 amp for 50 Hz installations.

Europe:

200-240 Volt 10 amp 50 Hz service outlet.

The stacker/stapler requires a separate power source from the

digital press.

NOTE: Best machine performance is achieved when conditions
are maintained between 20-25º C (68-77º F).

Paper stock specifications

The CSS Top Tray accepts all media types, sizes, and weights

supported by the digital press. The CSS Stack Tray accepts all

standard media sizes supported by the digital press with the

including sizes that are larger than A3/11 x 17 in.

TIP:

Paper that is larger than A3/11 x 17 inch cannot be stapled

or offset.

Environmental

requirements

Minimum

Maximum

Temperature:

10º C (50º F)

32º C (90º F)

Relative Humidity

(% RH):

20%

80%

Altitude:

Not applicable

Anything greater than

2000 meters (6560 ft.)

above sea level may

require field

adjustments

Содержание DocuColor 5000





































































































































































Результаты поиска

Содержание DocuColor 5000

Отзывы:

Xerox DocuColor 5000, Руководство пользователя, Страница: 100 / 164

Результаты поиска

Содержание DocuColor 5000

Отзывы: