Xerox DocuColor 5000 Скачать руководство пользователя страница 149

Страница: 149 / 164

DocuColor 5000 User Guide

7-13

7. Maintenance

TIP:

Do not use warm or hot water, or cleaning solvents, to

remove Dry Ink/Toner from your skin or clothing. This will set the

Dry Ink/Toner and make it difficult to remove. If any Dry Ink/Toner

gets on your skin or clothing, use a brush to remove it, blow it off,

or wash it off with cold water and mild soap.

Remove a new cartridge from the box.

CAUTION:

Dry Ink/Toner settles and compacts during shipping

and must be loosened before inserting the cartridge into the

machine. Failure to completely loosen the material may cause

damage to the gear at the end of the cartridge.

TIP:

Vigorously shake and/or slap the new cartridge with your

hand until the Dry Ink/Toner is completely loosened.

Insert the cartridge into the compartment by sliding it into
the compartment.

CAUTION:

If more than one cartridge needs to be replaced at

the same time, ensure that the cartridges are replaced in their

correct color locations. From left to right, the cartridge colors are

black 1, black 2, cyan, magenta, and yellow.

Close the Dry Ink/Toner compartment door.

Содержание DocuColor 5000





































































































































































Результаты поиска

Содержание DocuColor 5000

Отзывы:

Xerox DocuColor 5000, Руководство пользователя, Страница: 149 / 164

Результаты поиска

Содержание DocuColor 5000

Отзывы: