Xerox Color J75 Press, Руководство пользователя

Страница: 157 / 318

Width range Media size Switch number
250.0 - 306.9 mm (9.84 - 12.08 in.) A3 SEF
A4/Letter LEF
12 in. 2
100.0 - 179.9 mm (3.937 - 7.08 in.) A5
Postcard 3
307.0 - 330.2 mm (12.09 - 13.00 in.) SRA3
13 in. 4
100.0 - 330.2 mm (3.937 - 13.0 in.) Custom 5
100.0 - 330.2 mm (3.937 - 13.0 in.) Custom 6
100.0 - 330.2 mm (3.937 - 13.0 in.) Custom 7
Note
Positions 5, 6, and 7 must be set by the Xerox Service Representative. Contact the
Customer Support Center for more information and assistance.
Miscellaneous hints and tips
• System requirements messages (for example, "Order Waste Toner Container," "Hole
Punch Waste Container Full") may occasionally be blocked by the current UI screen.
Close the Job Status screen and open the Machine Status/Supplies screen to check
consumable status.
• If the machine stops running mid-job, or does not begin printing after a job is
submitted, check the Machine Status/Supplies screen to determine if supplies need
to be replaced. The system will stop if sufficient supplies are not available for a
submitted job. If the problem persists, check the Machine Status/Fault screen, select
the fault, and click on the Instructions button.
• If the machine stops running mid-job, or does not begin printing after a job is
submitted, verify that the applicable paper tray is not empty. The system will stop if
sufficient media is not available for a submitted job. If the problem persists, check
the Machine Status/Fault screen, select the fault, and click on the Instructions button.
• The system does not prohibit duplexing coated substrates from the internal trays
(Trays 1-3); however, there can be a significant increase in jams or multi-feeds. If
large quantities of coated paper are to be run, and if it is available, the optional OHCF
is recommended for paper feeding.
• When using heavy coated 11 x 17 in./A3 stock, closing Trays 1-3 with too much force
will result in a paper size misread. Open and close the tray gently to allow the paper
sensors to correctly identify paper size.
• If the adjustment arms are disturbed while re-loading paper in Tray 5 (Bypass), the
paper size setting will return to default and cause job to stop until the paper size
setting is corrected by the user.
10-41 Xerox
®
Color J75 Press
User Guide
Problem solving