manualshive.com logo in svg

Xerox Color J75 Press, Руководство пользователя, Страница: 197 / 318

Поделиться
Скачать
Xerox Color J75 Press Скачать руководство пользователя страница 197

4. Close the front cover of the Interface Module.

5. Follow the instructions on the UI to clear other areas or to resume your print job.

Fault codes

The fault code table lists problems and suggested solutions that apply to the Interface
Module. If the problem persists after following all instructions, call your Xerox Customer
Support Center.

048-100

Cause:  Paper jam:

A jam notification is displayed on the UI.
• A jam occurred during feeding.

Remedy:  Perform the following:

Carefully remove all sheets and paper scraps from the jam clearance areas.

Close the front door. Verify the paper used is within the approved paper specifications.
• Open the Interface Module front door.

048-101

Cause:  Paper jam:

A jam notification is displayed on the UI.
• A jam occurred during feeding.

Remedy:  Perform the following:

Carefully remove all sheets and paper scraps from the jam clearance areas.

Close the front door. Verify the paper used is within the approved paper specifications.
• Open the Interface Module front door.

048-102

Cause:  Paper jam:

13-9

Xerox

®

 Color J75 Press

User Guide

Interface Module

Содержание Color J75 Press































































































































































































































































































































Отзывы:

Нет отзывов