Xerox CiPress 325, Руководство по многопоточности в вебе

Страница: 48 / 60

2. Refer to the Web Registration Module Display and the Rear Web Edge Sensor
calibration percentage.
Left side of Display represents Rear Web Edge Sensor calibration percentage.
1
3. Open the Brass Clamp.
4. To properly calibrate the Rear Web Edge Sensor, grasp the Web Edge Adjustment
Knob and move the Rear Web Edge Sensor assembly according to the following,
watching the Display screen readings. If the Rear Web Edge Sensor percentage
calibration percentage currently shows a number that is:
• Greater than 55%, push the assembly in until the Display reads between 45%
and 55%.
• Less than 45%, pull the assembly out towards you until the Display reads between
45% and 55%.
5. Push down to close the Brass Clamp.
6. Turn the Rear Web Edge Sensor Adjustment Knob until the Display reads 50% for
the Rear Sensor.
7. Press on the Web Registration Module Control Panel to select the Rear Sensor.
8. Press on the Web Registration Module Control Panel to activate the web guiding
system.
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
9-2
Web Threading Guide
Setting Up and Activating the Web Registration Module