Xerox CiPress 325, Руководство по многопоточности в вебе

Страница: 12 / 60

• For Secondary Printer: Allow the Infeed Idler Roller to rotate freely. Pull out the
pin.
Idler Roller Locking Pin 1
Idler Roller Notch 2
11. Using a clean lint-free cloth and anti-static fluid, clean the upper and lower surfaces
of both the Front and Rear Web Edge Sensors.
Upper and lower areas of the Sensor.
1
12. Move the Front and Rear Web Edge Sensors out of the way.
a) Turn the Front Web Edge Sensor Adjustment Knob counterclockwise until it stops.
b) Loosen the thumbscrew by turning it counterclockwise.
c) Rotate the Rear Web Edge Sensor Adjustment Knob if necessary so that the Brass
Clamp is facing upward.
d) Pull up to release and open the Brass Clamp.
e) Grasp the Front Web Edge Sensor and gently pull the Sensor towards you so that
it is as far forward as possible.
f) Tighten the thumbscrew by turning it clockwise.
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
2-6
Web Threading Guide
Preparing the Infeed Module for Threading