Xerox CiPress 325, Руководство по многопоточности в вебе

Страница: 38 / 60

edge of the web. If the web width is 254 mm (10 inches) or less, the Front Idler Rollers
should be moved as far forward as possible so that the rollers do not touch the web.
The current measurement of 36 mm as shown from the front edge of the first
roller to the front edge of the web. 1
The allowable tolerance of 18 mm to 50 mm (.75 inches to 2 inches) from the
front edge of the first roller to the front edge of the web. 2
a) For the Infeed Module Front Idler Rollers, loosen the thumb screws and move the
Idler Roller to within the specification noted in the step above. When finished,
tighten the thumb screws.
Infeed Module Front Idler Rollers
1
Thumbscrews securing the Front Idler Rollers into place.
2
b) For the Outfeed Module Front Idler Rollers, loosen the thumb screws and move
the Idler Roller to within the specification noted in the step above. When finished,
tighten the thumb screws.
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
7-8
Web Threading Guide
Threading the Outfeed Module