Xerox B205, Руководство пользователя

Страница: 63 / 270

Network Connectivity
Xerox
®
B205 Multifunction Printer
User Guide
61
SLP
Printers use Service Location Protocol (SLP) to announce and look up services on a local network
without prior configuration. When SLP is enabled, the printer becomes a Service Agent (SA) and
announces its services to User Agents (UA) on the network using SLP.
Directory Agents (DA) are components that cache services. They are used in larger networks to reduce
the amount of traffic. DAs are optional. If a DA is present, then User Agents (UAs) and System Agents
(SAs) are required to use it instead of communicating directly with the printer.
Note: When configuring settings in Properties, you will be prompted to enter the Administrator
account user name and password. For information about logging in as an administrator, refer to
Accessing the Xerox® CentreWare® Internet Services Administrator Account .
To configure SLP settings using the printer control panel, refer to Network Settings .
Configuring SLP Settings Using Xerox
®
CentreWare
®
Internet Services
1. In Xerox
®
CentreWare
®
Internet Services, click
Properties

Connectivity

Protocols
.
2. Click
SLP
.
3. For
Protocol
, select
Enable
.
4. For
Directory Agent
, type the IP address for the Directory Agent (DA) as needed.
• To group services, under Scope 1, 2, and 3, type a name as needed. Printers cannot recognize
services that are in different scopes.
• For Message Type , select an option.
• Multicast : This option routes multicast packets between subnets for service discovery.
• Broadcast : If your network does not support multicast routing, select this option.
5. For Multicast Radius , type a value from 0 through 255.
6. For Maximum Transmission Unit (MTU) , type a value from 484 through 32768.
7. For Registration Lifetime , type a value in hours. From 1 through 24.
8. Click Apply .
SNMP
Simple Network Management Protocol (SNMP) is a set of network protocols designed to allow you to
manage and monitor devices on your network.
You can use the SNMP configuration pages in Xerox
®
CentreWare
®
Internet Services to:
• Enable or disable Authentication Failure Generic Traps.
• Enable SNMPv3 to create an encrypted channel for secure printer management.
• Assign privacy, authentication protocols, and keys to Administrative and key user accounts.
• Assign read and write access to User accounts.