Xerox apeosport 350 I, Руководство по администрированию сети

Страница: 83 / 160

Network Setting Items (Port/Protocol) for CentreWare Internet Services
81
Using CentreWare
Internet Services
10
IPP
This section describes the settings for the IPP port.
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address entry column on
the browser, and press the <Enter> key.
z
Example of the IP address entry
http://192.168.1.1/
z
Example of the Internet address entry
http://xxx.yyyy.zz.vvv/
Note • When specifying a port number, add “:” and a port number to the end of the Internet address.
3
Click the [Properties] tab.
4
Click [+] on the left of [Protocol Settings] to display the items in the folder.
5
Click [IPP].
6
Set [Add Port Number].
Note • Do not enter a number for the port number that is already used for other port numbers.
7
Select the [Enable] check box to enable [TBCP Filter].
Note • The TBCP Filter is set only when an optional PostScript 3 Kit is installed.
8
Select the [Enable] check box to enable [Administrator Mode].
9
Select the [Enable] check box to enable [DNS].
10
Set [Connection Time-Out].
11
Reflect the values as the machine's setting values.
1) Click the [Apply New Settings]. A screen to enter the user name and password will
be displayed.
2) Enter the System Administrator user ID and password into [User Name] and
[Password], and click [OK].
Note • The default user ID is “11111” and the default password is “x-admin”.
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot]. The machine will reboot and the setting value will be reflected.