Xerox AltaLink C81 Series, Руководство пользователя

Страница: 336 / 412

Print-Quality Problems and Solutions
Use the following table to find solutions to print-quality problems.
Note: At the printer control panel, press the Home button. Touch Device → Information
Pages → Troubleshooting Print Quality Page → Print .
Problem Solution
Smears, Smudges, and Streaks
Dark or light marks appear on your output.
Run a print job consisting of several blank pages
through the printer to remove toner accumulated on
the fuser.
If the problem persists, print the test pages to help
determine which component is causing the image-
quality problem.
• If the defect occurs in one color only, replace the
corresponding imaging unit.
• If the defect occurs in all colors and is visible on
all the test pages, replace the fuser.
Repeating Spots or Lines
Spot or lines appear at regular intervals on the prints.
1 To identify the part of the printer that is causing
the problem, print the Repeating Defects page. At
the control panel, press the
Home button, then
touch
Device → Tools → Troubleshooting → Support
Pages → Repeating Defects Page → Print .
2 To identify the part responsible for the repeating
spots or lines, follow the instructions on the
Repeating Defects page.
3 To correct the problem, replace the printer part
identified on the Repeating Defects page.
Colors Look Wrong
Colors are off or look drastically wrong.
1 Verify that the printer is on a solid, level, and flat
surface.
2 Perform the Print Calibration procedure. At the
control panel, press the Home button, then touch
Device
→
Tools
→
Troubleshooting
→
Calibra-
tion → Print Calibration → Next , then follow the
instructions.
Colors Too Light or Too Dark
The print or color density is too light, missing, or the
background is foggy.
1 Verify that the paper you are using is the correct
type for the printer and is loaded properly. For
details, see
Supported Paper .
2 Verify that the paper loaded in the tray matches
the paper type selected at the control panel and
in the print driver.
3 To print procedures on resolving print-quality
problems, at the control panel, press the Home
button. Touch Device → Information
Pages → Troubleshooting Print Quality
Page → Print .
336 Xerox ® AltaLink ® C81XX Series Color Multifunction Printer
User Guide
Troubleshooting