Xerox 8290 Скачать руководство пользователя страница 87 | Manualshive

Страница: 87 / 152

Xerox 8290 Скачать руководство пользователя страница 87

4 Printer Operation

8265/8290/8365/8390 User Guide

79

4.3.5.6 Longstore Menu (8365/8390 Only)

When storing the printer for longer than 5 days, ink cassettes with 8365/8390 Cleaning liquid should be
installed. For more details, please refer to maintenance cycle.

Setup items

Parameters

Description

No

Do not perform a long store

Yes

Perform the long store procedure.

Longstore

-

• [CANCEL] key: shift to the previous hierarchy
menu.

The process consists of several cleaning loadings, several air loadings and one ink loading. On the
display of the operation panel a time indication is mentioned on the fourth line.

Message

Time

1.

Please remove cart.

2.

Ink Discharge

3.

Please insert Cleaning cart.

4.

During washing wait for a while

5.

Ink not filled [ALL]

6.

Power OFF

29

Notes

When a cleaning cassettes is empty during LongStore procedure, remove the empty one and replace it by a
new one. Only the last cycle will be repeated. Although, the full time (29 minutes) is mentioned again on the
panel.

After powering OFF the machine, the tubings in the waste bottle should be mounted on the nipple plate at
the bottom of the machine. This to prevent air is coming in the ink system which will dry out the heads.

1

Nipple plate

How to load ink after a long store procedure?

«
...
85
86
87
88
89
...
»

Содержание 8290

























































































































































Отзывы:

Нет отзывов