Xerox 8290 Скачать руководство пользователя страница 27

Страница: 27 / 152

8265/8290/8365/8390 User Guide

3 PRINTER SETUP

3.1 TURNING THE PRINTER POWER ON/OFF

The method to turn the power ON or OFF is described below.

Caution

Before powering ON the unit, make sure the waste bottle is installed.

3.1.1 Turning the Power ON

Turn the power of the unit ON according to following procedure.

Step 1 :

Press the [POWER] key of the operation panel, to turn the unit ON.

The POWER lamp of the operation panel will light (green).

Step 2 :

The unit will start initial start-up operations.

Step 3 :

After finishing initial start-up operations, the unit will enter the normal operating condition.

Notes

If there are any problems during the initial start-up operation, the unit will display a message on the
operation panel, and the operation may stop. If the operation stops, refer to "Troubleshooting", and take
the appropriate actions.

3.1.2 Turning the Power OFF

Turn the power of the unit OFF according to the following procedure.

Step 1 :

Verify the following regarding the operational condition of the unit.

There is no printing operation being performed.

The operation panel is in a normal status.

Step 2 :

Press the [POWER] key of the operation panel to turn the unit OFF.

Содержание 8290

























































































































































Результаты поиска

Содержание 8290

Отзывы:

Xerox 8290, Руководство пользователя, Страница: 27 / 152

Результаты поиска

Содержание 8290

Отзывы: