Xerox 8290 Скачать руководство пользователя страница 28

Страница: 28 / 152

3 Printer Setup

8265/8290/8365/8390 User Guide

Notes

When the printer is ON, the power LED is lid green. Push the power button again to turn off the machine.

Step 3 :

Following message is displayed for 3 seconds on the operation panel.

Notes

If pressing the [POWER] key on the operation panel by mistake, press the [POWER] key again while the
following message is displayed.

Step 4 :

The product will perform the power OFF operation.

Following message is displayed on the operation panel.

All lamps and the LCD of the operation panel will turn OFF.

The product will automatically turn the power OFF after performing a tubing flush.

Notes

If there are problems during the power OFF operation, the unit will display a message on the operation
panel, and the operation may stop. If the operation stops, refer to “Troubleshooting” and take the
appropriate actions.

Содержание 8290

























































































































































Результаты поиска

Содержание 8290

Отзывы:

Xerox 8290, Руководство пользователя, Страница: 28 / 152

Результаты поиска

Содержание 8290

Отзывы: