manualshive.com logo in svg

Xerox 8290, Руководство пользователя, Страница: 74 / 152

Поделиться
Скачать
Xerox 8290 Скачать руководство пользователя страница 74

4 Printer Operation 

66 

8265/8290/8365/8390 User Guide 

4.3.3.6 SubnetMask Menu 

 
Set the subnet mask of the product. 
 

 

 

Setup items 

Parameters 

Description 

SubnetMask 000.000.000.000 

<255.255.255.000> 
255.255.255.255 

Use the following keys to change the Subnet Mask. 
• [F1] key: Moves one digit to the left on the setting value to be changed. 
• [F2] key: Increases the setting value. 
• [F3] key: Moves to the right on the setting value. 
• [F4] key: Reduces the setting value. 
• [ENTER] key: Sets the setting value, and moves the screen to the 
menu of the previous hierarchy. 
• [CANCEL] key: Cancels the setting value, and moves the screen to the 
menu of the previous hierarchy. 
Refer to ‘Network setting menu’ 

 

4.3.3.7 Gateway Menu 

 
The product sets the IP address of the connected gateway. 
 

 

 

Setup items 

Parameters 

Description 

Gateway <000.000.000.000> 

- 

223.255.255.254 

Use the following keys to change the IP address. 
• [F1] key: Moves one digit to the left on the setting value to be changed. 
• [F2] key: Increases the setting value. 
• [F3] key: Moves to the right on the setting value. 
• [F4] key: Reduces the setting value. 
• [ENTER] key: to confirm the setup value  
• [CANCEL] key: to cancel the setup value 

 

Содержание 8290

























































































































































Отзывы:

Нет отзывов