manualshive.com logo in svg

Xerox 8290, Руководство пользователя, Страница: 86 / 152

Поделиться
Скачать
Xerox 8290 Скачать руководство пользователя страница 86

4 Printer Operation 

78 

8265/8290/8365/8390 User Guide 

4.3.5.5 InkChange Menu 

 
Change the ink configuration (from 2x4 to 1x6 or opposite). 
 

 

 

Setup items 

Parameters 

Description 

No 

Do not perform an ink change. 

Yes 

To start the ink change cycle. 

InkChange 

- 

• [CANCEL] key: shift to the previous hierarchy 
menu. 

 

 

 

 

 Notes   

 

To reduce the consumption of ink and cleaning liquid it is recommended to change ink types by using the 
‘Ink Change’ cycle. 

 

 
The process consists of several cleaning loadings, several air loadings and one ink loading.  On the 
display of the operation panel a time indication is mentioned on the fourth line. 
 

Message 

Time 

1. 

Please remove cart. (*) 

 

2. 

Ink Discharge (*) 

1 

3. 

Please insert Cleaning cart (*) 

 

4. 

During washing wait for a while (*) 

5 

5. 

Remove cassettes 

 

6. 

During washing wait for a while 

7 

7. 

Please insert ink cart. 

 

8. 

Ink refill 

13 

9. 

The end 

 

 
(*) = This will be asked 5 times. 
 

Содержание 8290

























































































































































Отзывы:

Нет отзывов