Phaser 7400 PCL Commands
System Administrator Guide
B-7
Input Trays
The following table lists the PCL commands for the input trays supported by the
Phaser 7400 printer. The table also lists the alternate tray used if the optional input tray is not
installed.
Note:
When more than one command is listed, you can use either command.
Output Trays
The following table lists the PCL commands and PJL values for the output trays supported by
the Phaser 7400 printer.
Input Trays
PCL 5 Command
*
Alternate Tray
Tray 1 (MPT) in multi-sheet mode
<Esc>&l4H
<Esc>&6H
n/a
Tray 1 (MPT) in manual feed mode
<Esc>&l2H
<Esc>&l3H
n/a
Tray 2
<Esc>&l1H
n/a
Tray 3
<Esc>&l5H
Tray 2
Tray 4
<Esc>&l8H
<Esc>&l20H
Tray 1
Tray 5
<Esc>&l21H
Tray 1
Tray 6
<Esc>&l22H
Tray 1
Autoselect
<Esc>&l7H
n/a
Current tray/page eject
<Esc>&l10H
n/a
* The character that follows the “&” in the command is the lowercase letter “L”.
Output Tray
PCL 5 Command
*
PJL Value
Top output tray
<Esc>&l1G
FACEDOWN, UPPER,
STANDARD, or OFFSET
Left-side output tray
<Esc>&l2G
LOWER
Finisher output tray
<Esc>&l4G
OPTIONALOUTPUTBIN1
* The character that follows the “&” in the command is the lowercase letter “L”.
** The PJL Value is used with the PJL “OUTBIN” variable.