Phaser PJL Commands
System Administrator Guide
B-11
Phaser PJL Commands
The following table lists the most commonly used HP PJL and Xerox-unique PJL commands.
See also:
HP Printer Job Language Technical Reference
for the standard set of PJL commands.
PJL Command
Values
Description
@PJL FSDELETE NAME=“
pathname
”
*
Deletes a file from the internal
hard drive.
@PJL FSDIRLIST NAME=“
pathname
”
*
Lists PJL system files and
directories.
@PJL FSDOWNLOAD FORMAT:BINARY
SIZE=
size
NAME=“
pathname
”
*
Downloads a file to the internal
hard drive.
@PJL FSINIT VOLUME=
value
*
Initializes the internal hard drive.
@PJL FSMKDIR NAME=“
pathname
”
*
Creates the specified directory
on the internal hard drive.
@PJL FSUPLOAD NAME=“
pathname
”
*
Uploads file from the printer to
the host.
@PJL USTATUS
*
Allows the printer to send
unsolicited status messages for
device status changes,
end-of-job status, and pages
printed. Status can be sent at
specified time intervals.
@PJL USTATUSOFF
n/a
Turns off all status responses.
@PJL FSAPPEND
n/a
Appends data to an existing file,
or if the file doesn’t exist, creates
the file and loads it with the given
data.
@PJL XCLIENTJOBID=
value
Exactly 48 bytes
(first byte is 8 and
the 8 last bytes
represent a time in
the format
hhmmsshs
.
Sets the client job id used with
PrintingScout.
@PJL XJAFILENAME=“
filename
”
Roman-8
characters
1-255
Sets the file name for Job
Accounting.
@PJL XJAHOSTNAME=“
hostname
”
Roman-8
characters
1-255
Sets the host name for Job
Accounting.
@PJL XJAJOBNAME=“
jobname
”
Roman-8
characters
1-255
Sets the job name for Job
Accounting.
