background image

7-12

Setup Menus

Save Session

Selecting this option will cause the current session configuration to be saved to the
connection template specified in the 

Save Session As

 dialog box.

Save Session As...

This will display a dialog box which enables you to save the current session
configuration as a connection template.

TeemTalk enables you to create multiple connection templates, any one of which can
be used either when TeemTalk is loaded or while it is running. The procedure is as
follows:

1. In the 

Saved Items

 box, indicate which user preference settings are to be saved

by checking the boxes next to the relevant options.

2. In the 

Settings File

 text box, specify the name of the terminal emulation settings

file (and the directory path if different from the default) which is to store settings
only affecting the terminal emulation. The default filename is 

tt*w.nv

, where 

*

 is

either 

05

07

 or 

11

, depending on your version of TeemTalk.

Note: There is no need to specify file extensions as defaults are

applied when the files are created.

3. In the 

Save As File Name

 text box, specify the name of the workspace settings

file (and the directory path if different from the default) which is to store the user
preference settings selected by the 

Saved Items

 options. The default filename is

tt*w.wsp

, where 

*

 is either 

05

07

 or 

11

, depending on your version of TeemTalk.

Note: Splitting the saved settings into two files enables users to share

a common terminal emulation settings file while allowing each
user to have their own workspace settings file.

Содержание -05W



















































































































































































































































































































































































Отзывы: