Xer Fit Decline Dumbbell Bench, Сборка и руководство пользователя

Страница: 17 / 20

Assembly
5
Attach the Front Main Frame (4) to the Seat Support (5) using 1 x M8 x 90mm Hex Bolt (25),
2 x M8 Flat Washers (24) and 1 x M8 Nylon Locknut (22). Then insert 1 x M8 x 45mm Knob
(29) through the holes of Seat Support (5) and Front Main Frame (4).
Now attach the Front Stabiliser (3) to the Front Main Frame (4) using 4 x M8 x 20mm Hex
Bolts (23), 4 x M8 Curved Washers ( 21) and 4 x M8 Spring Washers (20).
FULLY TIGHTEN all Bolts, Nuts and
Fittings now, ensuring that your product
in located on a clear flat surface
before doing so.
Your product will now be ready to use.
Note
X
Please ensure when finally tightening
all Bolts that the locking ring in the
Locknut is fully engaged as (2) below.
(2) (1)
Page 17