25
EN
ACCESSORIE S
Temperature sensor BTC 100
The
optional
temperature sensor BTC 100 measures the temperature of the battery
during the entire charging process. Depending on the temperature measured the end
voltage is compensated.
Important
: this compensation must be activated. See the
chapter ‘Setting the charge program’.
MAINTENANCE
The charger doesn’t need any specific maintenance. When cleaning the housing, use a
(squeezed) dry cloth. Remove any filth and dust from the ventilation openings of the
charger. Follow the instructions of the manufacturer when using and handling the
battery. CAUTION! A battery contains corrosive sulphuric acid.
Important
Check the charge status of battery charger on a regular basis.
Check the cables and connection between the charger and battery regularly.
Check the ventilation vents and fan on a regular basis.
Check the degree of acidity of a non-maintenance free battery on a regular basis
WARRANTY AND SERVICE
The ProMax 200 chargers are marked with the Smart Value
service label of Xenteq. This service label gives you additional
advantages and certainties on service. Read more about this on
our website
Before sending the charger back, always advice the Trouble Shooter and other
information in this manual firstly. If a problem could have been solved by means of this
manual, we are obligated to charge the repair/research costs.
In case of a malfunction, the charger can be brought back to your supplier or it can be
send to the address on the back of this manual. The charger must be send prepaid. The
ProMax 200 carries a five-year warranty from selling date. This warranty only covers the
costs of parts and labour for the repair. The warranty period is only valid when the
(copy)purchase ticket is handed over with the repair. The warranty will lapse when a
third party has attempted to repair the charger or when the ProMax 200 is not installed
or used in accordance with the instructions. The only activities that may carried out
yourselves is the replacement of the input fuse. Do not attempt to repair the charger
yourselves.
The manufacturer cannot be hold responsible for the (suggested) charge settings or any
damage resulting from use of the Promax 200.