Xenteq ProMax 200, Руководство пользователя, Страница: 22 / 42

22
EN
Important
If you want to remove the charger from the battery, it’s important that the charging
process is always completely finished. As such, the charging process may only be
stopped when the green LED from ‘charge process’ lights or blinks. If the charging
process is interrupted before it is completed, the battery loses its charge and its acid
balance.
When disconnecting the battery, at interruption of the mains voltage or when the charger
is turned off, the current charging process will stop. When a battery is re-connected, the
mains voltage is present again or when the charger is turned on again, in all cases a new
charging process will start.
When a problem is detected at the start or during the charge process, a number will
appear in the display which indicates a certain error. Consult the ‘Charge Status’ and
‘Trouble Shooting’ for the right actions.
CHARGE STATUS
LED
red
LED yellow LED green
Error
display
lights blinks lights blinks
Boost X
Equalize X
Compensate X
Float X
Jogging X
Reverse polarisation
or no battery present
1
Battery voltage too
low
2
14 hours limit 3
Temperature sensor
4
Battery sulphated 5
Temp.sensor error 6
Consult “Trouble shooting” for the error messages