XENO XPTZ22IR, Руководство пользователя

Страница: 15 / 24

9

Preset point setting:
Setting a preset,
press button “””enter”, e.g. on a Vista VKBD4:
THEN “PRESET NUMBER” THEN
Calling a preset,
press button “call”+””enter”, e.g. on a Vista VKBD4:
“PRESET NUMBER” THEN
Deleting preset press button “clear”+””enter”.
Remark: Please note that some presets are reserved for special functions and cannot be
overwritten.
3.3 Special Function
The method of preset recall will vary from controller to controller, however the preset recall
number remain the same. The following presets are predefined as special functions and
cannot be overwritten. Note that whilst there are other commands in the Pelco protocol,
these are relevant to this camera:
Remark : depending on your control method, some control equipment may not be able to
recall certain presets or special functions because of the limitations of the protocol or the
feature does not exist in the camera.
PRESET FUNCTION
33 Pan Scan (180
°
)
34 Reset (Power re-cycle)
81 Auto Day/Night
82 Night mode (& IR)
83 Day mode
86 BLC on
87 BLC off
92 A-B Scan
94 OSD off
95 OSD on
96 Guard Tour 3
97 Guard Tour 2
98 Guard Tour 1
99 Pan Scan (continuous 360
°
)