Xenics Bobcat 320 Gated, Руководство пользователя

Страница: 32 / 34

User Manual
Bobcat 320 Gated
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third
party without written permission from Xenics.
Xenics nv T +32 16 38 99 00 Doc Ref: ENG-2012-UMN016
Ambachtenlaan 44 F +32 16 38 99 01 Issue: 002
BE-3001 Leuven  Belgium www.xenics.com Date: 09/11/2012
XF-104_02/20-01-2012
Page 32 of 34
8.3. Platform Registers
The platform registers are common for all cameras that share the same platform. The
system registers base address is: 0x2000.
Name
Offset
(hex)
R/W
Power- on
default
Description
mode 0000:2000 RW 15 See ‘mode flags’
setmode 0000:2004 RW 15 Set mode flag
clrmode 0000:2008 RW 15 Clear mode flag
roi.x 0000:2010 RW 0
Region of interest rectangle
roi.y 0000:2014 RW 0
roi.width 0000:2018 RW 384
roi.height 0000:201C RW 288
roi.dir 0000:2020 RW 0
Bit 0 = horizontal flip
Bit 1 = vertical flip
level 0000:2024 RW level offset
span 0000:2028 RW gain value
trigger.mode 0000:2030 RW 0
See chap. 8.3.1 Trigger
trigger.delay 0000:2034 RW 0
trigger.skip 0000:2038 RW 0
Table 8-4 Platform registers
8.3.1. Trigger
8.3.1.1. Trigger Mode
•
Bit 0 = Software trigger armed
•
Bit 1 = External trigger armed
•
Bit 2 = Fast rearm enabled (if disabled, multiple triggers in the same frame are
discarded)
•
Bit 3 = Edge(0)/Level(1)
•
Bit 4 = Rising, High(0) / Falling, Low(1).
8.3.1.2. Trigger Delay
The trigger delay is the amount of micro-seconds between the external trigger and the
actual trigger action.
Typically, there is an intrinsic jitter of ½ frame time.
8.3.1.3. Trigger Skip
The trigger skip is the amount of external triggers to be skipped.
i