User Manual
Bobcat 320 Gated
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third
party without written permission from Xenics.
Xenics nv
T +32 16 38 99 00
Doc Ref: ENG-2012-UMN016
Ambachtenlaan 44
F +32 16 38 99 01
Issue: 002
BE-3001 Leuven
Belgium
www.xenics.com
Date: 09/11/2012
XF-104_02/20-01-2012
Page 28 of 34
7. Getting Started
7.1. Install the Software
First perform the Xeneth installation and when necessary the SDK installation as well (see
chap.
6
.)
7.2. Connect the Camera Cables
The cable information and interfaces is described in chap.
4
.
7.3. Connect the Camera via Xeneth
Start up Xeneth by clicking the Xeneth shortcut on the desktop (see
Figure 7-1
). The
connection dialog will become visible. When the camera is not shown, click the refresh
button on the dialog. Select the camera, together with the calibration data suited for it. For
more details, consult the Xeneth User Manual
(1)
, section Connection setup - Settings.
Figure 7-1 Xeneth shortcut