XE210C Hydraulic Excavator
Operating and Maintenance Manual
93
Operation under special conditions
Attention on operation
a)
If the front working equipments of machine or other part collide with high
objects such as overpass, both the machine and overpass will be damaged
even the person will be injured.
b)
Look out to prevent the moving arm or bucket lever from bumping with
high object.
Avoid the electric wires
a)
If there is no safe distance between the machine or working equipments
with electric wires, a casualty accident may be resulted from an electric
shock.
b)
When working near high-voltage wires, don’t move any part of machine
or load into a range, namely 3 meters away from electric wire plus
double length of insulator.
c)
Verify and follow all the local regulations in point.
d)
Wet ground will increase the electric shock range for the people, so the surrounding people should be
far away from working area.
Drive the machine prudently
Important: in cold weather, you must park your machine on hard ground to avoid the crawler
frozen with ground. Remove the oddments on crawlers and chassis bodyframe. If the crawler
has been frozen with ground, lift the crawler with moving arm and bucket lever and move the
machine with care to avoid destroying the driving wheel and crawlers.
a)
Try to choose even road surface, make all the efforts to operate the machine and change the direction
through straight line and slight change.
b)
When driving on uneven area, engine speed should be decreased to lower the possibility of damaging
the lower machine body.
Filling procedure of fuel, hydraulic oil, lubricant and anti-freeze fluid
Fuel system
a)
Recommended fuel brand
List 1-10 Fuel brand list
Time and area
Fuel products
Non-winter
0#( Above 4
℃
)
Winter
-10# (Above -5
℃
)
Frigid area
-35# (Above -29
℃
)
b)
Capacity of fuel tank List 1-11 Capacity list
Type
Capacity of fuel tank
XE210C
380 L
XE210C3
Ⅶ
380 L
XE210C2
380 L
XE210C2
Ⅶ
380L
Fig.1-91
Fig.1-92
