User manual XC-32 XC-320 XC-4200
Indicate to Xcell the IP address of the server where the file will be staved, as well as the
name of this file and start the transfer :
ROOT>> system config server 192.168.1.1
ROOT>> system config path "/tmp/xcell.conf"
ROOT>> system config store
To restore configuration file, execute the next command :
ROOT>> system config load
CAUTION !!
The loaded configuration is stocked in RAM. Save it in FLASH memory with
the
save
command :
ROOT>> save
Status: Done.
ROOT>>
IV.7 - Opening of a user account
The opening of a user account can be made through the user commands.
Thanks to these commands, you can create or modify a user form.
To create a new form, use the
user add
command. You have to specify fields values
according to your needs :
IV.7.1 - Name and password
When you create a user, use the
user add
command, and precise the name and
password of this user. Example :
ROOT>> user add paul pws25d
If you do not need a password for this user (to use Autouser mode for example), replace it
by quotations marks.
The
user delete
command delete a user form. Example :
ROOT>> user delete paul
The
user show
command displays the users list or one particular user's characteristics.
ROOT>> user show
-25-
