background image

User manual XC-32 XC-320 XC-4200

IV.7.1 - Name and password...................................................................................25
IV.7.2 - Comments...................................................................................................26
IV.7.3 - In and Out communication.........................................................................26
IV.7.4 - Callback.......................................................................................................26
IV.7.5 - Audit.............................................................................................................27
IV.7.6 - Optional remote IP Address.......................................................................28
IV.7.7 - Telnet Address............................................................................................28

IV.8 - Management of a modem connection..........................................28
IV.9 - Audit...............................................................................................29

IV.9.1 - Audit on a remote machine........................................................................29
IV.9.2 - Audit on your console................................................................................30
IV.9.3 - Audit in a file...............................................................................................31
IV.9.4 - List of created audits..................................................................................31
IV.9.5 - Delete audit..................................................................................................31
IV.9.6 - Start/stop audit............................................................................................32

V.Terminal Mode (Telnet).................................................33

V.1 - Introduction.....................................................................................33
V.2 - Telnet...............................................................................................33
V.3 - Multi-sessions.................................................................................34
V.4 - Automatic Telnet.............................................................................35
V.5 - User connection diagram...............................................................35

VI.Rawtty and RemoteCOM.............................................37

VI.1 - Introduction....................................................................................37
VI.2 - RemoteCOM...................................................................................37

VI.2.1 - RemoteCOM under Windows 95/98...........................................................37

VI.2.1.1 - Setting up the Xcell................................................................................37
VI.2.1.2 - Installation of RemoteCOM driver..........................................................38

VI.2.2 - RemoteCOM under Windows NT system..................................................41

VI.2.2.1 - Setting up the Xcells..............................................................................41
VI.2.2.2 - Installation of RemoteCOM driver..........................................................42
VI.2.2.3 - Displaying RemoteCOM service status.................................................44

VI.3 - Rawtty.............................................................................................45

VI.3.1 - Server configuration...................................................................................45
VI.3.2 - Setting up the XC........................................................................................46
VI.3.3 - rawtty, rawclose..........................................................................................46

VII.Mux mode....................................................................48

VII.1 - Introduction...................................................................................48
VII.2 - TCP Mux........................................................................................48
VII.3 - UDP Mux........................................................................................48
VII.4 - Example n°1: Remote management of a PLC by a technician. .48

VII.4.1 - Description.................................................................................................48
VII.4.2 - Configuration of client's side XC..............................................................49
VII.4.3 - Configuration of server's side XC............................................................50

VII.5 - Example n°2: Remote management of a PLC by more than one
technician (solution 1)............................................................................50

-3-

Содержание XC-32





























































































Отзывы: