Xcel-Arc Razor Cut80, Руководство по эксплуатации

Страница: 14 / 20

14
●
Piercing
Hold the torch at an angle to the work piece,
pull the trigger to start the arc and slowly
rotate it to an upright position. When sparks are exiting from the bottom of
the work piece, the arc has pierced through
the material. When the pierce is complete, proceed with
cutting.
●
Safety Trigger Operation
The Suregrip SC80 torch supplied with the RazorCut 45 machine has a new design of safety trigger.
Just pull back on the trigger whilst increasing your grip and you will feel the trigger move to the on position.
When you release the pressure it will return to the off position.
off
on
off
Operating Procedure & Techniques
for PLASMA Cutting
Razor
Cut
RAZOR CUT8O