Xcel-Arc Razor Cut80, Руководство по эксплуатации, Страница: 8 / 20

8
Razor Cut
RAZOR CUT80 PLASMA
80 Amp Inverter Plasma Cutter
Cuts: Steels, Stainless, Cast Iron, Brass, Copper. Aluminium
Product Code: XA-CUT80RZ-K
Standard Package includes: RAZOR CUT80 Machine, SC80 Plasma Torch 6m, Earth Lead & Spares Kit
Overview
The RAZOR CUT80 is a high quality industrial-rated three phase inverter Plasma Cutting machine produced using the latest in IGBT in-
verter technology and incorporating advanced MCU intelligent software technology. The machine automatically monitors and controls all
critical functions and compensates for possible inconsistencies caused by wear in torch components, environmental temperature or humid-
ity. The resulting cutting performance is greatly improved compared to traditional plasma cutting machines. The RAZOR CUT80 is reliable,
robust and stacked with features that you can expect from a high quality plasma cutter including full CNC connection. The RAZOR CUT80
is equipped with a high quality Suregrip SC80 Plasma Torch with Euro Style connection and 6mtr cable. The SC80 Plasma Torch provides
effortless starting of the cut with powerful, fast and accurate stand-off cutting with drag cutting capability. The SC80 Plasma Torch uses
low-cost wear consumables with the additional benefit of longer life cycle of both Electrodes and Cutting Tips. The RAZOR CUT80 is an
exceptional machine that is well suited to a wide range of applications including industrial and general engineering, forestry and agriculture,
site work, heavy transport and marine repair, general demolition and maintenance work. The RAZOR CUT80 provides great portability, with
stacks of cutting power to get the job done with outstanding speed and a great finish.
Built to our specification and manufactured in compliance to AS/NZ60974-1
Features
■
Latest IGBT Inverter Technology
■
Heavy Industrial application
■
CNC-Ready
■
Outstanding performance from three-phase
■
HF Arc Ignition (non-contact)
■
Stand-off cutting with drag cut capability
■
Maximum sever cutting thickness (steel) 35mm
■
High quality Surecut SC80 Plasma Torch 6mtr
■
Euro Style torch connection, low-cost consumables
■
Auto protection for over Voltage & over current
■
Auto protection for low air & thermal overload
■
Integral pre-set air regulator, self-drain type
■
Suitable to cut all electrically conductive materials
■
Lightweight & compact design
■
Strong metal housing with plastic front & rear panels
■
Tolerant to variable power supply
80Amp 415V
Inverter Plasma Cutter
Industrial Rated with CNC Compatibility
30mm Cut on Mild Steel
RAZOR CUT80 RAZOR CUT80
Optional machine accessories available - refer www.xcelarc.nz
XA-CUT80RZ
Standard Package
Technical Data
Power Supply / Phases (V-Ph) 415V - 3 +/- 10%
Rated Input Power 15.0
kVA
I
i
eff
as per AS/NZ60974-1
12.6 Amps
I
Max 20.0 Amps
Plasma Cut Current Range 20-80Amps
Duty Cycle @ 40°C
as per AS/NZ60974-1
40% @ 80Amps
Duty Cycle @ 25°C
(approximate)
80% @ 80Amps
No Load Voltage 310V
Plasma Arc Start Pilot Arc
Air Flow Draw Off 6.7 cfm
Air Pressure 75 psi
Steel Cut Thickness 30mm
Steel Sever Thickness 35mm
Aluminium Cut Thickness 16mm
Aluminium Sever Thickness 20mm
Stainless Cut Thickness 16mm
Stainless Sever Thickness 20mm
Insulation Class F
Protection Class IP21S
Dimensions
(LxWxH)
560x220x415mm
Weight Power Source 16.0kg
Certification Approval AS/NZ60974-1