Xantrex Watt Series Programmable DC Power Supply XG 850, Руководство по эксплуатации

Страница: 34 / 286

Installation
2-4 M370078-01
Step 2: Location and Mounting
The power supply may be rack-mounted or used in benchtop applications.
Rack Mounting
The XG 850 Watt power supply is designed to fill half of a standard
19 inch (483 mm) equipment rack.
Units can be combined with the same models in the 850 W series for
customer applications.
Purchasing Rack Mount Kits
Contact Xantrex Customer Service (see “Contact Information” on
page iii) about purchasing the Rack Mount Kit options for XG 850 Watt.
For a list of the part numbers, see “Part Numbers for Rack Mount Kits”
on page iii. Installation information for the different rack mount options
are provided with the rack mount kits.
For XG product support, visit www.programmablepower.com and
navigate to the XG home page.
Ventilation
Whether operating the power supply in a rack or on a bench, allow air to
reach the ventilation inlets on the front and rear of the unit for cooling.
The direction of airflow is from the front of the unit to the back of the
unit. Ventilation space is not required at the top, bottom or sides of the
power supply.