Xantrex GT5.0-NA-240, Руководство пользователя

Страница: 78 / 90

Specifications
A–8 975-0334-01-01
GT2.8
Input
Output
GT2.8-NA-240/208 UL-05 GT2.8-NA-240/208-POS UL-05
Model number 864-1001 864-1002
Input voltage, Maximum Power Point range Certified operating range: 195–550 Vdc.
(Unit is operable as low as 193 Vdc.)
Absolute maximum array open circuit voltage 600 Vdc
Maximum input current 15.4 Adc (240 V), 14.9 Adc (208 V)
Maximum array short circuit current 24 Adc
Reverse polarity protection Short circuit diode
Ground fault protection GF detection, I
DIF
> 1 A
Nominal output voltage
240 V 208 V
Maximum output power 2800 W 2700 W
Operating range, utility voltage (phase to phase)*
* Factory settings can be adjusted with the approval of the utility. This unit is provided with adjustable trip
limits and may be aggregated above 30 kW on a single Point of Common Coupling. See “Adjustable Volt-
age, Frequency and Reconnection Settings” on page A–10.
212–263 Vac 184–228 Vac
Operating range, utility voltage (phase to neutral)* 106.1–131.5 Vac
Nominal output frequency 60 Hz
Operating range, utility frequency* 59.3–60.5 Hz
Startup current 0 Aac
Maximum continuous output current 11.7 A 13.0 A
Maximum output fault current 15 A
Maximum output overcurrent protection 20 A RMS
Maximum utility backfeed current 0 A
Total Harmonic Distortion <5%
Power factor >0.99% (at rated power), >0.95% (full power range)
Utility monitoring— islanding protection Vac, fac as per UL 1741 (2005)
Output characteristics Current source
Output current waveform Sine wave