Xandex 340-7110, Инструкция по установке и эксплуатации

Страница: 4 / 54

4 820-0332
SAFETY INFORMATION
Safety and Hazard identification symbols used in this document are intended to be
compliant with ANSI/NEMA Z 535.6 2006. The table below lists the symbols used
in this document along with a description of each type of safety hazard. Failure to
observe identified safety risks may result in serious injury or death.
Safety and Hazard Identification Symbols
SYMBOL DESCRIPTION
DANGER = Indicates a hazardous situation which, if
not avoided, will result in death or serious injury
WARNING = Indicates a hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION = Indicates a hazardous situation which, if
not avoided, could result in minor or moderate
injury.
NOTICE = Indicates a practice that is not related to
personal injury but may cause damage to equipment
or property.
Use this product only in the manner described in this
manual. If the equipment is used in a manner not
specified by the manufacturer, the protection provided
by the equipment may be impaired.
Install the pneumatic controller in a location that is
easily accessible to the operator. The ON/OFF switch
is the pneumatic controller’s main disconnecting device
and must be easily accessible at all times.
For your safety, the AC power cord set provided with
your product has a grounded plug. Always use the
power cord with a properly grounded wall outlet, to
avoid the risk of electrical shock.
Do not operate this product with a damaged AC power
cord set. If the AC power cord set is damaged in any
manner, replace it immediately. Damaged cords may
result in user exposure to hazards.
DANGER
WARNING
CAUTION
WARNING
WARNING
WARNING
WARNING