Xandex 340-7110, Инструкция по установке и эксплуатации

Страница: 42 / 54

Ink Troubleshooting Maintenance & Troubleshooting
820-0332
6-2
Problem Solution
Small, inconsistent or no
ink dots.
1.
Soft Teflon

tip of the cartridge tube is clogged or
damaged. Change ink cartridge.
2. The dot size setting may be too low. Increase dot
size setting.
3. Air pressure too low. Verify that or the controller’s
air regulators are set to 80 ± 5 PSI.
4. Z height adjustment is incorrect. After cartridge
replacement, occasional Z height adjustment may be
required due to the unavoidable incidence of slight
manufacturing variations from cartridge to
cartridge. It is recommended that at setup, several
rows of dots be placed and inspected for
consistency. See Section 4 “Inker Assembly
Setup and Alignment.”
5. Shuttle mechanism may be binding.